Our Kemp-based crews carry the parts and the know-how to get your air moving again today. Emergency dispatch available across Kemp and the surrounding zip codes.
Our Kemp dispatcher asks a few quick questions to gauge urgency and get you the fastest available window.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
Warranty details are explained clearly so you know exactly what's covered going forward.
Leonard HVAC didn't start as a franchise chasing volume. Every technician we send to your door is background-checked, factory-trained, and licensed to work on the systems installed throughout Kemp, TX.
We're not the biggest name in Kemp — we're the crew that answers the phone at 2am when your furnace quits in the middle of a cold snap. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, residential or commercial.
Being local matters more than most companies let on. That local knowledge shapes how we diagnose problems — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Trust in this industry gets eroded fast, and it takes real consistency to earn it back. That's the gap we built Leonard HVAC to close. We'd rather lose a job to a lower bid than win one by cutting corners on the diagnosis, because a customer who trusts us once tends to call us again — and Kemp is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Kemp rooftop unit. We keep parts inventory stocked based on what actually fails most often on Kemp's housing stock.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Kemp dispatch team sends the closest available truck first so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
Not every repair call ends in a repair — sometimes the honest recommendation is a properly sized replacement. We walk Kemp homeowners through efficiency ratings and how they translate into real monthly savings before a single piece of equipment gets ordered.
Every install ends with a performance test, confirming airflow, temperature split, and refrigerant charge are all where they should be before we consider the job finished.
Downtime in a commercial space costs money every hour a system is offline. Our commercial division services light industrial and warehouse ventilation across Kemp, with after-hours work to avoid disrupting business.
We understand that a commercial call isn't just about comfort, it's about keeping a business open.
A seasonal tune-up catches the kind of wear that turns into a mid-summer no-cool call. Beyond standard tune-ups, we also handle indoor air quality upgrades for homes with allergy or asthma concerns for Kemp households that want more than just temperature control.
We'll show you photos of anything concerning we find, along with a plain-language explanation of what it means and whether it's urgent.
We'd rather set clear expectations upfront than make vague promises we can't back up.
Details vary by job type and are always shared upfront, never buried in fine print.
We quote a flat rate before work begins and that number doesn't change once you approve it.
Our office follows up after major repairs and installs to confirm everything is holding.
A little attention to how your system is running can save you a lot of money and discomfort.
A healthy system runs with a consistent, low hum — banging, screeching, or grinding usually points to a loose part or failing motor.
If some rooms stay hot or cold no matter what the thermostat says, the system may be struggling to distribute air evenly.
Gradual efficiency loss is easy to miss month to month, but it adds up fast over a season.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
A musty smell often points to mold or moisture buildup somewhere in the ductwork.
Repeated repairs on an aging system are usually the clearest sign that replacement will save more money than another patch job.
We explain diagnostic fees and repair estimates before authorizing work.
Emergency calls get moved to the front of the line automatically.
If something isn't right after we leave, we come back and make it right.
Every technician carries current state licensing and manufacturer training.
Photos and plain-language notes accompany every diagnostic.
Maintenance plan members get priority scheduling and discounted rates.
We don't write these — our customers do.
"The furnace stopped working overnight and someone was at our door before 9am. Fixed on the first visit and explained everything in terms I could actually understand."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. You can tell these guys actually know what they're doing."
"They handled the whole install in a single day, exactly like they said they would. New system is noticeably quieter and our energy bill actually dropped."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Now our go-to for every property in the portfolio."
"I appreciated that they didn't try to sell me a bigger unit than I needed. Would use them again without hesitation."
"Called at 11pm during a heat wave and honestly didn't expect anyone to pick up, let alone show up. This is the company I'm saving in my phone now."
Understanding what typically fails helps homeowners know what to watch for and when a repair call is worth making before things get worse.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Before the heaviest cooling months hit, it's worth having the refrigerant charge checked, the condenser coils cleaned, and the filter replaced — all of which directly affect how hard the compressor has to work.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Our technicians train across the major residential and commercial equipment lines, so you're not limited to a single brand's service network. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Here's a look at the kind of experience that shows up at your door.
Manufacturer-certified across multiple major residential equipment lines.
Keeps the emergency truck stocked based on what actually fails most often locally.
Works directly with Kemp property managers to schedule around business hours.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
We explain the diagnostic fee upfront and provide a flat-rate repair quote once the issue is identified.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
We maintain current credentials because it protects both our customers and our team.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Plan members typically see fewer surprise breakdowns because small issues get caught during routine visits.
If you're unsure whether your address falls in our service area, a quick call to +1-866-805-8548 will confirm it.
Our commercial team handles rooftop units, multi-zone systems, and facility contracts alongside our standard residential repair work.
Our technicians are trained across the major residential and commercial equipment lines, not limited to a single manufacturer.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Most Kemp homes benefit from two tune-ups a year — one before cooling season and one before heating season.
Beyond basic safety checks, it's best to leave diagnosis to a licensed technician rather than attempting a repair yourself.
Ask about current after-hours rates when you call +1-866-805-8548.
Straightforward fixes like a capacitor swap or a thermostat replacement are often finished in well under an hour.
For commercial accounts or rental properties, a designated point of contact or property manager can coordinate access instead.
Housing stock varies a lot across Kemp — older homes often still run original ductwork that needs different care than the sealed, high-efficiency systems going into newer builds.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Kemp.
We accept standard payment methods for repairs and smaller jobs, and we'll always tell you upfront what a given service is likely to cost so there's no last-minute scramble to figure out payment. If a rebate or local incentive program applies to your Kemp installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
We dispatch throughout Kemp and the neighboring communities, keeping response times tight because our trucks stay close to home.
Coverage isn't limited to a single neighborhood or subdivision — our Kemp dispatch zone stretches across the metro area and into the surrounding suburbs and unincorporated communities.
